Network Working Group
Request for Comments: 2279
Obsoletes: 2044
Category: Standards Track
F. Yergeau
Alis Technologies
January 1998
Page 1

UTF-8, a transformation format of ISO 10646

Status of this Memo

This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.

Copyright Notice

Copyright © The Internet Society (1998). All Rights Reserved.

Abstract

ISO/IEC 10646-1 defines a multi-octet character set called the Universal Character Set (UCS) which encompasses most of the world's writing systems. Multi-octet characters, however, are not compatible with many current applications and protocols, and this has led to the development of a few so-called UCS transformation formats (UTF), each with different characteristics. UTF-8, the object of this memo, has the characteristic of preserving the full US-ASCII range, providing compatibility with file systems, parsers and other software that rely on US-ASCII values but are transparent to other values. This memo updates and replaces RFC 2044, in particular addressing the question of versions of the relevant standards.

1 Introduction

ISO/IEC 10646-1 [ISO-10646] defines a multi-octet character set called the Universal Character Set (UCS), which encompasses most of the world's writing systems. Two multi-octet encodings are defined, a four-octet per character encoding called UCS-4 and a two-octet per character encoding called UCS-2, able to address only the first 64K characters of the UCS (the Basic Multilingual Plane, BMP), outside of which there are currently no assignments.

It is noteworthy that the same set of characters is defined by the Unicode standard [UNICODE], which further defines additional character properties and other application details of great interest to implementors, but does not have the UCS-4 encoding. Up to the


Page 2

present time, changes in Unicode and amendments to ISO/IEC 10646 have tracked each other, so that the character repertoires and code point assignments have remained in sync. The relevant standardization committees have committed to maintain this very useful synchronism.

The UCS-2 and UCS-4 encodings, however, are hard to use in many current applications and protocols that assume 8 or even 7 bit characters. Even newer systems able to deal with 16 bit characters cannot process UCS-4 data. This situation has led to the development of so-called UCS transformation formats (UTF), each with different characteristics.

UTF-1 has only historical interest, having been removed from ISO/IEC 10646. UTF-7 has the quality of encoding the full BMP repertoire using only octets with the high-order bit clear (7 bit US-ASCII values, [US-ASCII]), and is thus deemed a mail-safe encoding ([RFC2152]). UTF-8, the object of this memo, uses all bits of an octet, but has the quality of preserving the full US-ASCII range: US-ASCII characters are encoded in one octet having the normal US- ASCII value, and any octet with such a value can only stand for an US-ASCII character, and nothing else.

UTF-16 is a scheme for transforming a subset of the UCS-4 repertoire into pairs of UCS-2 values from a reserved range. UTF-16 impacts UTF-8 in that UCS-2 values from the reserved range must be treated specially in the UTF-8 transformation.

UTF-8 encodes UCS-2 or UCS-4 characters as a varying number of octets, where the number of octets, and the value of each, depend on the integer value assigned to the character in ISO/IEC 10646. This transformation format has the following characteristics (all values are in hexadecimal):

   -  Character values from 0000 0000 to 0000 007F (US-ASCII repertoire)
      correspond to octets 00 to 7F (7 bit US-ASCII values). A direct
      consequence is that a plain ASCII string is also a valid UTF-8
      string.

   -  US-ASCII values do not appear otherwise in a UTF-8 encoded
      character stream.  This provides compatibility with file systems
      or other software (e.g. the printf() function in C libraries) that
      parse based on US-ASCII values but are transparent to other
      values.

   -  Round-trip conversion is easy between UTF-8 and either of UCS-4,
      UCS-2.


Page 3

   -  The first octet of a multi-octet sequence indicates the number of
      octets in the sequence.

   -  The octet values FE and FF never appear.

   -  Character boundaries are easily found from anywhere in an octet
      stream.

   -  The lexicographic sorting order of UCS-4 strings is preserved.  Of
      course this is of limited interest since the sort order is not
      culturally valid in either case.

   -  The Boyer-Moore fast search algorithm can be used with UTF-8 data.

   -  UTF-8 strings can be fairly reliably recognized as such by a
      simple algorithm, i.e. the probability that a string of characters
      in any other encoding appears as valid UTF-8 is low, diminishing
      with increasing string length.

UTF-8 was originally a project of the X/Open Joint
Internationalization Group XOJIG with the objective to specify a File System Safe UCS Transformation Format [FSS-UTF] that is compatible with UNIX systems, supporting multilingual text in a single encoding. The original authors were Gary Miller, Greger Leijonhufvud and John Entenmann. Later, Ken Thompson and Rob Pike did significant work for the formal UTF-8.

A description can also be found in Unicode Technical Report #4 and in the Unicode Standard, version 2.0 [UNICODE]. The definitive reference, including provisions for UTF-16 data within UTF-8, is Annex R of ISO/IEC 10646-1 [ISO-10646].

2 UTF-8 definition

In UTF-8, characters are encoded using sequences of 1 to 6 octets. The only octet of a "sequence" of one has the higher-order bit set to 0, the remaining 7 bits being used to encode the character value. In a sequence of n octets, n>1, the initial octet has the n higher-order bits set to 1, followed by a bit set to 0. The remaining bit(s) of that octet contain bits from the value of the character to be encoded. The following octet(s) all have the higher-order bit set to 1 and the following bit set to 0, leaving 6 bits in each to contain bits from the character to be encoded.

The table below summarizes the format of these different octet types. The letter x indicates bits available for encoding bits of the UCS-4 character value.


Page 4

   UCS-4 range (hex.)           UTF-8 octet sequence (binary)
   0000 0000-0000 007F   0xxxxxxx
   0000 0080-0000 07FF   110xxxxx 10xxxxxx
   0000 0800-0000 FFFF   1110xxxx 10xxxxxx 10xxxxxx

   0001 0000-001F FFFF   11110xxx 10xxxxxx 10xxxxxx 10xxxxxx
   0020 0000-03FF FFFF   111110xx 10xxxxxx 10xxxxxx 10xxxxxx 10xxxxxx
   0400 0000-7FFF FFFF   1111110x 10xxxxxx ... 10xxxxxx

Encoding from UCS-4 to UTF-8 proceeds as follows:

1) Determine the number of octets required from the character value and the first column of the table above. It is important to note that the rows of the table are mutually exclusive, i.e. there is only one valid way to encode a given UCS-4 character.

2) Prepare the high-order bits of the octets as per the second column of the table.

3) Fill in the bits marked x from the bits of the character value, starting from the lower-order bits of the character value and putting them first in the last octet of the sequence, then the next to last, etc. until all x bits are filled in.

The algorithm for encoding UCS-2 (or Unicode) to UTF-8 can be obtained from the above, in principle, by simply extending each UCS-2 character with two zero-valued octets. However, pairs of UCS-2 values between D800 and DFFF (surrogate pairs in Unicode parlance), being actually UCS-4 characters transformed through UTF-16, need special treatment: the UTF-16 transformation must be undone, yielding a UCS-4 character that is then transformed as above.

Decoding from UTF-8 to UCS-4 proceeds as follows:

1) Initialize the 4 octets of the UCS-4 character with all bits set to 0.

2) Determine which bits encode the character value from the number of octets in the sequence and the second column of the table above (the bits marked x).

3) Distribute the bits from the sequence to the UCS-4 character, first the lower-order bits from the last octet of the sequence and proceeding to the left until no x bits are left.

If the UTF-8 sequence is no more than three octets long, decoding can proceed directly to UCS-2.


Page 5

NOTE -- actual implementations of the decoding algorithm above should protect against decoding invalid sequences. For instance, a naive implementation may (wrongly) decode the invalid UTF-8 sequence C0 80 into the character U+0000, which may have security consequences and/or cause other problems. See the Security Considerations section below.

A more detailed algorithm and formulae can be found in [FSS_UTF], [UNICODE] or Annex R to [ISO-10646].

3 Versions of the standards

ISO/IEC 10646 is updated from time to time by published amendments; similarly, different versions of the Unicode standard exist: 1.0, 1.1 and 2.0 as of this writing. Each new version obsoletes and replaces the previous one, but implementations, and more significantly data, are not updated instantly.

In general, the changes amount to adding new characters, which does not pose particular problems with old data. Amendment 5 to ISO/IEC 10646, however, has moved and expanded the Korean Hangul block, thereby making any previous data containing Hangul characters invalid under the new version. Unicode 2.0 has the same difference from Unicode 1.1. The official justification for allowing such an incompatible change was that no implementations and no data containing Hangul existed, a statement that is likely to be true but remains unprovable. The incident has been dubbed the "Korean mess", and the relevant committees have pledged to never, ever again make such an incompatible change.

New versions, and in particular any incompatible changes, have q conseuences regarding MIME character encoding labels, to be discussed in section 5.

4 Examples

The UCS-2 sequence "A<NOT IDENTICAL TO><ALPHA>." (0041, 2262, 0391, 002E) may be encoded in UTF-8 as follows:

41 E2 89 A2 CE 91 2E

The UCS-2 sequence representing the Hangul characters for the Korean word "hangugo" (D55C, AD6D, C5B4) may be encoded as follows:

ED 95 9C EA B5 AD EC 96 B4


Page 6

The UCS-2 sequence representing the Han characters for the Japanese word "nihongo" (65E5, 672C, 8A9E) may be encoded as follows:

E6 97 A5 E6 9C AC E8 AA 9E

5 MIME registration

This memo is meant to serve as the basis for registration of a MIME character set parameter (charset) [CHARSET-REG]. The proposed charset parameter value is "UTF-8". This string labels media types containing text consisting of characters from the repertoire of ISO/IEC 10646 including all amendments at least up to amendment 5 (Korean block), encoded to a sequence of octets using the encoding scheme outlined above. UTF-8 is suitable for use in MIME content types under the "text" top-level type.

It is noteworthy that the label "UTF-8" does not contain a version identification, referring generically to ISO/IEC 10646. This is intentional, the rationale being as follows:

A MIME charset label is designed to give just the information needed to interpret a sequence of bytes received on the wire into a sequence of characters, nothing more (see RFC 2045, section 2.2, in [MIME]). As long as a character set standard does not change incompatibly, version numbers serve no purpose, because one gains nothing by learning from the tag that newly assigned characters may be received that one doesn't know about. The tag itself doesn't teach anything about the new characters, which are going to be received anyway.

Hence, as long as the standards evolve compatibly, the apparent advantage of having labels that identify the versions is only that, apparent. But there is a disadvantage to such version-dependent labels: when an older application receives data accompanied by a newer, unknown label, it may fail to recognize the label and be completely unable to deal with the data, whereas a generic, known label would have triggered mostly correct processing of the data, which may well not contain any new characters.

Now the "Korean mess" (ISO/IEC 10646 amendment 5) is an incompatible change, in principle contradicting the appropriateness of a version independent MIME charset label as described above. But the compatibility problem can only appear with data containing Korean Hangul characters encoded according to Unicode 1.1 (or equivalently ISO/IEC 10646 before amendment 5), and there is arguably no such data to worry about, this being the very reason the incompatible change was deemed acceptable.


Page 7

In practice, then, a version-independent label is warranted, provided the label is understood to refer to all versions after Amendment 5, and provided no incompatible change actually occurs. Should incompatible changes occur in a later version of ISO/IEC 10646, the MIME charset label defined here will stay aligned with the previous version until and unless the IETF specifically decides otherwise.

It is also proposed to register the charset parameter value "UNICODE-1-1-UTF-8", for the exclusive purpose of labelling text data containing Hangul syllables encoded to UTF-8 without taking into account Amendment 5 of ISO/IEC 10646 (i.e. using the pre-amendment 5 code point assignments). Any other UTF-8 data SHOULD NOT use this label, in particular data not containing any Hangul syllables, and it is felt important to strongly recommend against creating any new Hangul-containing data without taking Amendment 5 of ISO/IEC 10646 into account.

6 Security Considerations

Implementors of UTF-8 need to consider the security aspects of how they handle illegal UTF-8 sequences. It is conceivable that in some circumstances an attacker would be able to exploit an incautious UTF-8 parser by sending it an octet sequence that is not permitted by the UTF-8 syntax.

A particularly subtle form of this attack could be carried out against a parser which performs security-critical validity checks against the UTF-8 encoded form of its input, but interprets certain illegal octet sequences as characters. For example, a parser might prohibit the NUL character when encoded as the single-octet sequence 00, but allow the illegal two-octet sequence C0 80 and interpret it as a NUL character. Another example might be a parser which prohibits the octet sequence 2F 2E 2E 2F ("/../"), yet permits the illegal octet sequence 2F C0 AE 2E 2F.

Acknowledgments

The following have participated in the drafting and discussion of this memo:

   James E. Agenbroad    Andries Brouwer
   Martin J. D|rst       Ned Freed
   David Goldsmith       Edwin F. Hart
   Kent Karlsson         Markus Kuhn
   Michael Kung          Alain LaBonte
   John Gardiner Myers   Murray Sargent
   Keld Simonsen         Arnold Winkler


Page 8

Bibliography

[CHARSET-REG] Freed, N., and J. Postel, "IANA Charset Registration Procedures", BCP 19, RFC 2278, January 1998.

   [FSS_UTF]      X/Open CAE Specification C501 ISBN 1-85912-082-2 28cm.
                  22p. pbk. 172g.  4/95, X/Open Company Ltd., "File
                  System Safe UCS Transformation Format (FSS_UTF)",
                  X/Open Preleminary Specification, Document Number
                  P316.  Also published in Unicode Technical Report #4.

   [ISO-10646]    ISO/IEC 10646-1:1993. International Standard --
                  Information technology -- Universal Multiple-Octet
                  Coded Character Set (UCS) -- Part 1: Architecture and
                  Basic Multilingual Plane.  Five amendments and a
                  technical corrigendum have been published up to now.
                  UTF-8 is described in Annex R, published as Amendment
                  2.  UTF-16 is described in Annex Q, published as
                  Amendment 1. 17 other amendments are currently at
                  various stages of standardization.

   [MIME]         Freed, N., and N. Borenstein, "Multipurpose Internet
                  Mail Extensions (MIME) Part One:  Format of Internet
                  Message Bodies", RFC 2045.  N. Freed, N. Borenstein,
                  "Multipurpose Internet Mail Extensions (MIME) Part
                  Two:  Media Types", RFC 2046.  K. Moore, "MIME
                  (Multipurpose Internet Mail Extensions) Part Three:
                  Message Header Extensions for Non-ASCII Text", RFC
                  2047.  N.  Freed, J. Klensin, J. Postel, "Multipurpose
                  Internet Mail Extensions (MIME) Part Four:
                  Registration Procedures", RFC 2048.  N. Freed, N.
                  Borenstein, " Multipurpose Internet Mail Extensions
                  (MIME) Part Five: Conformance Criteria and Examples",
                  RFC 2049.  All November 1996.

   [RFC2152]      Goldsmith, D., and M. Davis, "UTF-7: A Mail-safe
                  Transformation Format of Unicode", RFC 1642, Taligent
                  inc., May 1997. (Obsoletes RFC1642)

   [UNICODE]      The Unicode Consortium, "The Unicode Standard --
                  Version 2.0", Addison-Wesley, 1996.

   [US-ASCII]     Coded Character Set--7-bit American Standard Code for
                  Information Interchange, ANSI X3.4-1986.


Page 9

Author's Address

Francois Yergeau
Alis Technologies
100, boul. Alexis-Nihon
Suite 600
Montreal QC H4M 2P2
Canada

Phone: +1 (514) 747-2547

   Fax:   +1 (514) 747-2561
   EMail: fyergeau@alis.com


Page 10

Full Copyright Statement

Copyright © The Internet Society (1998). All Rights Reserved.

This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English.

The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns.

This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.